#Read_Info_By_CM2
Card found: S/N : 8XXXXXXX , v0136
Chinese Miracle II [SPD module] v 1.26
Set mode to : SP [SC773x] eMMC [Generic]
Operation : Check/Read Info [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : sp7731gea_hdrplus_dt
Model Brand : EVERCOSS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 18/11/2015 06:50:20
Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
Model Ext : A75
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:40
Reconnect Power/Cable!
Card found: S/N : 8XXXXXXX , v0136
Chinese Miracle II [SPD module] v 1.26
Set mode to : SP [SC773x] eMMC [Generic]
Operation : Check/Read Info [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FLASH : eMMC Flash , Structure : Ok!
Reading extended info ...
Model Name : sp7731gea_hdrplus_dt
Model Brand : EVERCOSS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
CompileDate : 18/11/2015 06:50:20
Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
Model Ext : A75
ExtraInfo : HWInfo not exists, normal phone
Elapsed: 00:00:40
Reconnect Power/Cable!
#Read_Flash_By_CM2
Operation : Read FullFlash [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp7731gea_hdrplus_dt
Model Brand : EVERCOSS
Model Device: scx35_sp7731gea_lm_fs031
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : EVERCOSS_A75_V05_5.1_18-11-2015
Model Ext : A75
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1633 MiB
Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75\
Done!
Elapsed: 00:11:30
Reconnect Power/Cable!
#Read_NV_By_CM2
Operation : Read NV [ v1.26 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable
==== Wait for phone...
Phone found! [ 39 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Detected eMMC Flash , Structure detect Ok!
Read GSM NV
Read WCN NV
Read Ok , 0xA596
Saved to : C:\BACKUP SPREADTRUM\EVERCOSS A75\CX77xx_SPDNV.spdnv
Elapsed: 00:00:39
Reconnect Power/Cable!
#Screenshoot
Read Info By CM2 |
Read Flash By CM2 |
Read NV By CM2 |
Info By Sticker Label |
About Phone Evercoss A75 |
Oke,langsung saja download file-nya dibawah ini :
SP7731GEA_HDR_scx35_sp7731gea_lm_fs031_5.1_EVERCOSS_A75_V05_5.1_18-11-2015_A75 |
NOTE :
- Silahkan konfimasi terlebih dahulu bertanya password ke facebook admin
- Laporkan saja jika link diatas mati/rusak
- Jika berkenan tolong tinggalkan sedikit komentar secukup-nya