Firmware Mito Fantasy A350 Backup CM2 [Tested Flash File]

#Read_Info_By_CM2
Card found : S/N : 8XXXXXXX , v0136
Chinese Miracle II [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 32 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E503058585858109FA9BA38A0E5
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E503058585858109FA9BA38A0E5
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xF0205F824BA60000F7AF1E8912C8C479
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : alps
ProdName : MITO A350
ProdModel : MITO A350
Device : MITO A350
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.6

Done!
Elapsed: 00:00:18
Reconnect Power/Cable!

#Read_Firmware_By_Cm2

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 32 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : FE014E503058585858109FA9BA38A0E5

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0xFE , OEM : 014E

[eMMC] : FLASH_INF : [MICRON] , XXXX0

[eMMC] : FLASH_CID : FE014E503058585858109FA9BA38A0E5

[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID : 0xF0205F824BA60000F7AF1E8912C8C479

INT RAM : 0x00020000

EXT RAM : 0x20000000 [512 MiB]

BOOT TYPE : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand : alps

ProdName : MITO A350

ProdModel : MITO A350

Device : MITO A350

AndroidVer: 4.2.2

MTKxCPU : MT6572

MTKxPRJ : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_hexing72_wet_jb3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hexing72_wet_jb3 / EMMC

Android Info saved

HWConfig Info saved

FW Size : 680 MiB

Scatter saved to : C:\BACKUP SCATTER\MITO A350\MT6572__alps__MITO_A350__MITO_A350__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Done!

Elapsed: 00:04:01

Reconnect Power/Cable!

#Read_NV_By_CM2

Operation : Read NVRAM [ v1.58 ]